Thumbnail Filmstrip of Preacher Curl Pad for SB/PRO Images
Description
Preacher Curl Pad for SB/PRO/PROV2
We're here to preach the good news, and that is you can now start pumping your arms when you use your Super Bench or Super Bench PRO V2 with the Ironmaster Preacher Curl Pad. This attachment is very effective in isolating your biceps. It is also adjustable to give you a personalized arm-blasting workout.
Assistive
Preacher curls are a great exercise for building your arm muscles and creating definition because they target and isolate your biceps so well. The Ironmaster Preacher Curl Pad has been designed to enhance your comfort while you are doing this powerful arm exercise.
- Measuring 12" high x 24" wide x 2" thick, this pad has adequate space for supporting your elbows and arms.
- Made of high-quality padding to ensure your comfort during your intense arm workouts.
- Designed to improve the isolation of your biceps to better target these specific arm muscles.
Adjustable
The Ironmaster Preacher Curl Pad is adjustable in three angles so you can modify your workout according to your desired position.
- Adjust the angle of the pad by simply inserting the selector pin in one of the three holes.
- You can also change the angle of your bench to an incline that you are most comfortable with.
Adaptable
Like our other products, the Ironmaster Preacher Curl Pad is designed to work with a variety of equipment for your convenience and bigger cost-savings.
- This versatile attachment can be used with a cable machine, barbell or dumbbells.
- It connects easily to your Super Bench/PRO. If you have the older discontinued Ironmaster machine benches, you can connect the Preacher Curl Pad to them as well. The recommended load capacity on the hooks is 120 lbs to keep your bench stable.
- It also works well with the Ironmaster Dockable Support on the Ironmaster Smith Machine or Ironmaster Cable Tower Attachment.
Compatible with all Ironmaster Super Bench models
The Preacher Curl Attachment for Super Bench/PRO is an excellent addition to your existing Ironmaster bench, whichever version it may be.
- This attachment is compatible with all Ironmaster Super Bench models, both old and new including the PRO V2.
- It can easily be attached to the spine of your Super Bench using the pull pin.
Note:
- If you load a heavy amount of weight on the bar pegs, the bench may tip forward if no one is sitting on it. We recommend putting a loaded dumbbell or large weight plate on the rear end of the Super Bench pad to prevent this from happening.
- The Ironmaster Super Bench/PRO is sold separately.
Quick-Lock EZ Curl Bar on hooks
Reviews
19
4
2
0
0
Chris Crawley (GA) | December 10th, 2024
Great attachment. Great build quality. Sturdy during use. Quick install/removal. Great concept.
Kevin Hartzog (CA) | November 26th, 2024
I've had my preacher pad for a couple of weeks now, and have used it about 4 times. I do appreciate that it securely fits Iron Masters bench version 2. The pad can be set with three angles. Currently, I tend to use the middle angle. The pad is dense enough so that I am comfortable lifting. I wish that the height was adjustable. While I am 6', I find myself lifting off of the bench to get into a comfortable position to curl. I wish that the height was adjustable. I do wish Iron Master allowed uploading a picture of my set-up.
KH (Covington GA) | July 4th, 2024
I like the curl pad. But feel that it should have more adjustment in order to sit down on bench. Like the hook holder to rest curl bar on, but it is a little unstable when going rest the curling bar on it. Still does a great job when working arms on it.
J Murphy (Toledo, OH) | May 20th, 2024
I have had the adjustable bench with the sit-up and seat for many years. I have been looking at adding the Preacher Curl Pad for many years but never ordered it because I didn't want to have an extra piece of equipment laying around my exercise room. After ordering it, I realize I should have ordered it long ago - oh, well...
The only thing I don't like is that it wobbles a bit when on the flat bench (even after tightening the lock bolt). Although irritating, I can live with it. I'm glad I have it.
The only thing I don't like is that it wobbles a bit when on the flat bench (even after tightening the lock bolt). Although irritating, I can live with it. I'm glad I have it.
Christian Fant (Texas) | May 11th, 2024
This is a very well built pad and has good size to it . All super bench attachments have been really good quality!
Alex (Iron masters online) | April 17th, 2024
I can hardly believe i am doing hammer preacher curls in my own home . For arms you have to get this one addition you will not regret it i promise
John (Arizona) | December 31st, 2023
Love the adjustability and the pad. At 5'6" I have no issues using at all and it feels great. As with most preacher attachments it has the standard bar holder. Widening the bar holder would set iron master apart from the competition farther and make this attachment even better. Making it easier to load weight.
Tom Payne (Tulsa, OK) | December 29th, 2023
The pad is great. I love the ability to set the angles. I use it with Amy cable attachment and it works better than I could have hoped. So useful and take up so little space. PERFECT for a home gym. You can tell they really took time to get the angels and height right. I'm 5'10" and it feel awesome - TY Iron Master!
Doug (GA) | October 14th, 2023
Pretty much echo the reviews here. I do think it could be greatly improved by making the adjustments to the bar holder mentioned in many of the reviews. But even for that to work IronMaster needs to develop a counterweight attachment for the other end of the bench. This would also help with the leg attachment. Shouldn’t be too difficult or costly as they could use the same “slots” as the seat attachment. I also have the wobble problem so look forward to trying the shim solution mentioned in another review.
John (Colorado) | September 4th, 2023
The preacher curl pad works as intended. I am quite a bit of iron master equipment and I'm always 100% thoroughly satisfied.
I will suggest as others have done previously that the support that holds the curl bar needs to be widened. It's impossible to not only load weights but a bent curl bar resting on the support bar it doesn't take much being off center for it to fall off.
Over all the piece is a great addition and I will still give it 5 starts. Ironmaster is a great comany!
I will suggest as others have done previously that the support that holds the curl bar needs to be widened. It's impossible to not only load weights but a bent curl bar resting on the support bar it doesn't take much being off center for it to fall off.
Over all the piece is a great addition and I will still give it 5 starts. Ironmaster is a great comany!
Dwight | May 22nd, 2023
Supportive wide pad, very stable and solid build.
Jim | May 20th, 2023
Great attachment. Good quality. It came well packed. I've used it for two workouts now, glad I made the purchase. In order for me to get the best position for my arms/ arm pits I add height to the seat by sitting on a 2" thick book. If they made it height adjustable it would be heavier and more expensive. I'm 5' 11. Mine has a little side to side wobble and I solved that with two thin plastic shims. Awesome how it isolates the biceps. I highly recommend it.
David (PA) | June 22nd, 2022
Overall very sturdy, width of the padding is very good.
The part that holds the bar needs to be thicker and wider. I would like to be able to load plates onto the EZ bar while it rests on the preacher curl attachment. The sizing and placement also makes it difficult to grab the preacher bar closer to the middle of the bar (without having to re-adjust the positioning of my hands during the first rep of the exercise).
The part that holds the bar needs to be thicker and wider. I would like to be able to load plates onto the EZ bar while it rests on the preacher curl attachment. The sizing and placement also makes it difficult to grab the preacher bar closer to the middle of the bar (without having to re-adjust the positioning of my hands during the first rep of the exercise).
Eric | June 13th, 2022
Just what i needed. I like the wider pad for variable elbow placement to target various muscles.
Kurt (Ontario) | June 6th, 2022
Received my attachment and was eager to use it. It was very easy to assemble as well as to utilize with my bench. Sturdier than I thought. Overall experience was fantastic, quick delivery, easy install and product better than anticipated.
Jose De La Mota (California) | March 20th, 2022
Great addition to the bench pro and easy way to make a complete home gym along with the other accessories. 5 stars all day
Stephane (Quebec) | February 10th, 2022
This is an excellent attachment. I hesitated a lot before buying it based on mixed reviews I had read on Internet. I'm working out with olympic barbells and EZ bars and the pins would not work safely. However, having a squat stand with spotter arms, these works perfectly to hold the bar so I can pick it up and do my sets. Otherwise, positioning and ROM feels perfect. I'm 6' and the positionning is perfect for me. One of the biggest advantages of Ironmaster products, beside high quality, is space saving. I'm working in my home gym, a small room in the basement, and there is no way I could have a dedicated preacher curl bench in there. The Ironmaster attachment is convenient, high quality and provide great variety in training. Could not be happier with this item.
ziv r (cincinnati) | November 24th, 2021
Very well build, the Preacher Curl pad attaches firmly into the bench. padding is great as well.
Kent (MO) | October 2nd, 2021
Lots of room and padding for a great preacher curl. Easy to install and remove during workouts and adjustable to get that perfect angle. Can't go wrong with this one.
Jeffrey (Moore, OK) | February 8th, 2021
The pad is very comfortable and solid. However as mentioned below, the narrow spacing of the supports makes loading weights impossible. I also wish the supports had some kind of rubber padding so they wouldn't scratch the finish on my curl bar. Finally, not necessarily a reflection of the Preacher Curl attachment, but the Super Bench Pro itself is not heavy enough to counterbalance the weight being on one end of the bench, and tends to lift during use. I solved this by placing a 45lb plate on the other end of the bench. Still I would recommend purchasing this if your space is limited like mine is.
reynaldo (whittier, CA) | July 28th, 2020
I love this more than I though I would. The angles works great to really hit the biceps and I like using it as a back rest to do overhead triceps extensions with a curl bar. Using the bench in an upright position doing those, the bench would get in the way and using the Preacher curl attachments helps. I also like that the preacher curl attachment fits perfectly on the accessory tree and doesn't take up a lot of space. I love mine.
Paul (Lakeside, AZ) | June 23rd, 2020
Very solidly built unit. Use it with my IM2000 for cable curls and also when I do military press I use it as back support to lean my back to it.
Jesse (Stevens Point, WI) | June 14th, 2020
Excellent preacher pad with plenty of adjustability. I solely use this with the cable tower with an EZ-curl/or single handle attachment, works great. I can see how it may not be the best using a free weight bar due to the close spacing of the racking system. Unit is solid and comfortable and works flawlessly with the docking curl support.
Reviewer | August 21st, 2016
I'm interested in buying Version 2 Like reviewer Jonathan Brady mentioned, I would love to have a decent preacher curl add-on to the Super bench, but this one's supports look flimsy and unstable. The whole thing looks great except for the part that holds the bar. It needs to be thicker and wider. I would like to be able to load plates onto the EZ bar while it rests on the preacher curl attachment. Thanks for all this great equipment Ironmaster - I'm loving my new home gym!
David | July 15th, 2016
Needs re-engineering for safe use with curl bars I've owned this attachment for a couple of years & used it with dumbbells. Yesterday I received the curl bar from IronMaster & tried to use it with this attachment. Due to the narrow spacing of the support bars it is impossible to safely load weights unless you load both sides at the same time. That's hard and you are likely to have the bar fall off the supports onto your feet. Additional support bars on the edges of the pad would be a huge improvement and technically feasible.
